3.7.18 Idle Line Preference
Description: When you enable idle line preference, a station will automatically connect to any
assigned and idle line that you have programmed for this purpose when the user takes the
station off hook.
To Program: 1. Dial 54. “STA/LINE CONFIG.”
2. Dial 7. “IDLE LINE PREF.”
3. Select line ports (LED On = Selected Port)
—Line port 1–14 = Dial 01–14 or press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then press A1–A8.
4. Dial # when all line ports are selected.
5. Select station ports (LED On = Feature Assigned)
—Station 10–57: Dial 10–57 or press C10–C57.
6. Dial ✳ when all station ports are selected
—OR—
dial ✳✳for next station/line feature
—OR—
dial ✳✳✳for configuration mode.
To clear current setting, repeat procedure.
Digital Telephone System IMI66–107
3 – 66 System Programming
To Next Page
Loading...