Comdial G0408 - Assign Toll Restriction Tables to Stations for Night Transfer (of Ringing); Assign Toll Restriction Tables to System Speed Dial Calls

3.19.5 Assign Toll Restriction Tables To Stations
For Night Transfer (of ringing)
Description: Toll tables assigned with this feature have an effect only when the attendant places the
telephone system in the night transfer (of ringing) mode of operation.
To Program: 1. Dial 74. “ASSIGN TOLL-NITE”
2. Dial 01–16 or press A1–A14, B1, B2 for toll tables 1–16 (LED On = Selected table).
3. Dial # to finish entry.
4. Select station ports (LED On = station ports to receive tables)
—Station 10–57 = Dial 10– 57 or press C10–C57.
5. Dial ✳ for next toll table to night answer assignment
—OR—
dial ✳✳for configuration mode.
To clear current setting, repeat procedure.
3.19.6 Assign Toll Restriction Tables To System Speed Dial Calls
Description: When you enable this feature, the system applies toll restriction tables that you have
assigned to a station to the system speed dial calls that users make from that station.
To Program: 1. Dial 53. “STATION FEATURES”
2. Dial 05. “SYS SPD TOLL RST”
3. Select station ports (LED On = station ports assigned)
—Station 10–57 = Dial 10–57 or press C10–C57
4. Dial ✳ for next station feature
—OR—
dial ✳✳for configuration mode.
To clear current setting, repeat procedure.
IMI66–107 Digital Telephone System
System Programming 3 – 151