Comdial G0408 - Do Not Disturb (DND) Button; DSS;BLF Button

3.8.6 Do Not Disturb (DND) Button
Description: Pressing the DND button prevents other stations from calling the DND station.
To Program: 1. Dial 56. “BUTTON MAPPING”
2. Dial 07. “ASSIGN DND CODE”
3. Select button to be programmed
—Press A1–A14, B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57 = Dial 10–57 or press C10–C57.
5. Dial ✳ for further DND button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear assignment , dial 5604, press button, dial # select station, and dial ✳✳✳.
3.8.7 DSS/BLF Button
Description: DSS buttons provide quick access to system stations and their lights and show the busy
status of the monitored stations.
To Program: 1. Dial 56. “BUTTON MAPPING”
2. Dial 03. “ASSIGN DSS/BLF”
3. Select button to be programmed
—Press A1–A14, B1–B10.
4. Select station port (LED On = Selected).
—Station 10–57 = Dial 10–57 or press C10–C57.
5. Repeat steps 3 and 4 until all ports are assigned.
6. Dial #.
7. Select station ports (LED On = Selected)
—Station 10–57 = Dial 10–57 or press C10–C57.
8. Dial ✳ for further DSS/BLF button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear assignment , dial 5604, press button, dial # select station, and dial ✳✳✳.
Digital Telephone System IMI66–107
3 – 84 System Programming