3.9.6 Verified Account Code Entry
Description: Use this programming procedure to arrange for the system to either verify or not verify
the account codes that users enter.
To Program: 1. Dial 75. “SMDA PROGRAMMING”.
2. Dial 08.“VERIFICATION XXX.
3. Press A1 to toggle the feature on or off (LED On = Verified)
—OR—
dial 1 to enable verification “VERIFICATION ON ”
dial 2 to disable verification. “VERIFICATION OFF”
5. Dial ✳✳for configuration mode.
To change setting, repeat procedure and make opposite selection.
IMI66–107 Digital Telephone System
System Programming 3 – 93
To Next Page
Loading...