Comdial G0408 - Configuring RS232 Data Port B (Required Programming); Setting the Audible First Ring Feature (Optional Programming)

3.23.3 Configuring RS232 Data Port B (required programming)
Description: Configures RS232 Data Port B to receive Caller ID data.
To Program: 1. Dial 15. “BAUD RATE”
2. Dial 2 for data port B.
3. Press A10 for 9600 baud. “W nD nS 9600"
4. Dial 11 or press A14 for 8 data bits
and 1 stop bit. “W 8D 1S ZZZZZ”
5. Dial ✳✳ for configuration mode.
3.23.4 Setting The Audible First Ring Feature (optional programming)
Description: Turns on the Audible First Ring feature for the system.
To Program: 1. Dial 17. “SYSTEM FEATURES”
2. Dial 01. “CID FIRST RING”
3. Dial 1 to enable the audible first ring (LED on)
—OR—
Dial 2 to silence the first ring on Caller ID lines.
4. Press ✳✳ for configuration mode.
IMI66–107 Digital Telephone System
System Programming 3 – 169