Assign All-Call and Zone Paging Button
Description: If you wish, you can assign a paging button to provide a station with one-button access to
the all-call and zone paging feature.
To Program: 1. Dial 56. “BUTTON MAPPING ”
2. Dial 09. “ASSIGN ZONE”
3. Select button to be programmed (LED On = Paging Button).
—Press A1–A14, B1–B8.
4. Dial 1–3 for zone 1–3 “ASSIGN ZONE X ”
—OR—
dial 4 for all-call. “ASSIGN ALL CALL ”
5. Select station ports (LED On = Button Assigned To Port)
—Station 10–57: Dial 10–57 or press C10–C57.
6. Dial ✳ for further paging button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear a paging button, dial 5604, press paging button, dial #, and repeat steps 5 and 6.
Digital Telephone System IMI66–107
3 – 50 System Programming
To Next Page
Loading...