Assign Ringing For Automatic Attendant Operation
Description: With its automatic attendant feature, the voice mail system automatically answers any
line that is ringing at a voice mail port. As a default, the system automatically enables
ringing line preference for any port that you have identified as a voice mail port. You
must choose a ringing assignment for the lines that you have assigned to the voice mail
ports before the voice mail system can provide the automatic attendant feature.
To Program: 1. Dial 54. “STA/LINE CONFIG”
2. Dial 1 for direct ringing “DIRECT RING”
—OR—
dial 2 for delayed ringing “DELAY RING”
—OR—
dial 3 for night transfer (of ringing). “NIGHT RING”
3. Select line ports for direct ringing
—Line port 1–14 = Dial 01–14 or press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then press A1–A8.
4. Dial # when all line ports are selected.
5. Select station ports to be programmed (LED On = Selected)
—Station 10–57 = dial 10–57 or press C10–C57.
6. Dial ✳ when all station ports are selected.
7. Dial ✳✳✳for configuration mode.
To change setting, repeat procedure and make different selection.
To clear current setting, repeat procedure.
Digital Telephone System IMI66–107
3 – 108 System Programming
To Next Page
Loading...