SMDA Report Printout
Description: You can command the system to print several different types of SMDA reports and to
delete all stored SMDA records.
NOTE: The departmental call distribution report reflects statistics based on current
departmental station assignments. Before you use the previous programming
feature to reassign stations to different departments, it is a good practice to:
(1) print the departmental call report and any other desired SMDA reports,
(2) make any desired reassignments, (3) delete all SMDA records.
To Program: 1. Dial 07. “SMDA REPORTS”
2. Choose report for printout
—Dial 1#for all stations “STATION REPORT”
—Dial 1, 10–57, # for one station “STATION REPORT”
—Dial 2#for all lines “TRUNK REPORT”
—Dial 3#for SMDA department “DEPT. REPORT”
—Dial 4#for account code “ACCOUNT REPORT”
—Dial 5#for auto report. “AUTO REPORT”
—Dial 6#for all records “PRINT RECORDS”
—Dial 7#to delete records “DELETE RECORDS”
—Dial 0#for DCD report “DCD REPORT”
—Dial 8 to obtain the number of free records
remaining in system “FREE RECS XXXXX”
—Dial 9 to abort printout. “ABORT PRINT”
3. Dial ✳ for configuration mode.
IMI66–107 Digital Telephone System
System Programming 3 – 144
To Next Page
Loading...