Commodore MPS 1200 - Master Reset

DELETE eats characters one at a tim
Dr it can eat them in one gulp--
Cancel (Epson mode only)
BASIC
Hex
chr$(24)
18
This command, chr$(24) , is the cancel command. It cancels all
information currently in the buffer when it is received. For cancel
to
work properly, it must be sent to the MPS 1200 before the buffer
is emptied (that is, before a carriage return is sent and before a full
line
of characters have been sent).
Example:
10 open 1,4,7
20 print#1 ,chr$ (27)"! "chr$ (I);
30 print#1, lIThe enti re"chr$ (24) II buffer is cleared by cancel"
40 print#l,OIThis line contains more than enough characters to fill one line and ther'efore the COl.
neel command cannot erase the entire line"chr$(24)
50 close 1
buffer is cleared by cancel
This line contains more than enough characters to fill one line and ther~efore the cancel command
Master Reset
BASIC
Hex
chr$(27) "@"
1B 40
The master reset command, ESC @, which we discussed in Chap-
ter 3, cancels all information in the buffer just as the cancel com-
mand does. But, in addition, it resets all print funCtions to their
default setting.
9-4