Commodore MPS 1200 - Master Pitch

The Illaster reset command is ESC @. Note: Internal switch 1-8
Illust be set to the
OFF position to reset to pica. Try the following
program to see how it works:
1.1) openi,4,7
·;on pt'int#l, cht'$ (27) "E"Cht'$ (27) "-1";
c rlt'$ (27) II W 1" ;
:"'.1) pt"'int#l ,chr$(27) "G"
C
ht'$(27) "4";chr$(27) ;cht'$(15);
"One wi th the WOt'kS"
40 pt'int#1,cht'$(27) 1I@1I," ••• and one without."
:';0 closel
Op« with th« "grks
••• and one without.
You can also do a master reset by sending a secondary address of
10. For example, the statements
OPEN 10,4,1O:PRINT#10:CLOSE 10
also reset the printer.
Master Pitch
Fonnat
BASIC
Hex
ON
chr$(27)chr$(126)"3"chr$(n)
1B 7E 33 nh
OFF
chr$(27)chr$(126)"3"chr$(O)
1B 7E 33 OOh
The master pitch command allows you to change between com-
pressed and normal print in pica or elite with one command. The
master pitch command is ESC-3. To select the particular pitch
combination you want, send its ASCII code number, chr$(n) (with
n being 0, 1,2,5,6 or 7) after the master pitch command. Table 3-3
shows the values for n and the corresponding pitch selection.
3-24