Commodore MPS 1200 - Expanded Print

Expanded Print
Format
BASIC
Hex
ON
chr$(27) "W1"
1 B D7 31
OFF
chr$(27) "WO"
1B D7 30
Both of the MPS 1200's pitches can be expanded to twice their
normal width. In expanded print, the width of the characters and
the spaces are doubled.
This means the maximum number of
characters per line is cut in half.
Expanded pica prints 5 characters per inch, so you can print a
maximum of 40 characters per line on the MPS 1200. Expanded
elite prints 6 characters per inch, for a
maximum of 48 characters
per line.
The command to select expanded print is ESC W. Like the NLQ
command, the expanded print command uses a 1 and 0 as its on and
off switches. Sending ESC WI to the MPS 1200 turns on expanded
print; sending
ESC WO turns off expanded print. Try the following
statements:
lOop en 1 , 4, 7
20 for n=32 to 56:a$=a$+chr$(n):next n
30 if x=l then 60
4(' pt~int#l ,cht'$(27) ;cht~$ (80); "Pica"
5':' goto 70
60 pl··'int#1.!cht~$(27) "M"; "Elite"
7';:' pt~int#1,cht~$(27) "Wi"; "e:·:pand it"
80 pt'int#l, a$
9(' pt~int#1,cht'$(27)"W(J"; "no, don't"
1')(' pt·'int#l, a$
105 x=x+l:if x<2 then 30
110 closel
3-7