CommScope Era CAP M 9 - Connect the CAP M to an RF Antenna; Connect the CAP M to a Classic CAN or TEN; Connect a Secondary CAP M (Optional)

Era
™
Medium Power Carrier Access Point Installation Guide M0201AJB
Page 44 © October 2018 CommScope, Inc.
Installing CAP Ms
Attaching a Hybrid Fiber Splice Box for a Dual Mount Installation
1 Breaktheleft-handsidehookoftheSpliceBoxbracket.Thisisnecessaryforpropermounting.
2 HangtheSpliceBoxontotheDualMountingBracketontheleft-handsideoftheCAPM,asshownbelow.
Dual
Mounng
Bracket
Hybrid Fiber
Splice Box