JHL90 Service Manual
This section describes how to determine if the express card player is functioning
properly. The process is summarized in Figure 6-12. Perform the steps below
starting with Procedure 1 and continuing with the other procedures as requi
• Procedure 1: express card test
red.
eplacement check
13.1
program. Ensure the card in fully
cke ogram.
13.2
ged or defective, for instance the socket
e bent. Disassemble the computer following the steps described in
persists,
• Procedure 2: express socket r
Procedure 1 Express card test
The Express test card contains a express test
inserted into the so t before running the pr
If an error occurs during the express test, perform Procedure 2. If no error occurs,
it is likely the that original PC card was faulty.
Procedure 2 Express card socket replacement check
The express card socket may be dama
pins can b
Chapter 4, Replacement Procedures and replace the socket. If the problem
the system board may be defective or damaged.
6-31
To Next Page
Loading...
