JHL90 Service Manual
10.2.2 TPM State (JHL90/JHT00)
Phoenix SecureCore(tm) Setup Utility
TPM State
Current TPM State: Enabled/Disabled and Activated/Deactivated
Change TPM State: [No Change]
F1 Help ↑↓ select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ select menu Enter Select 4 Sub-Menu F10 Save and Exit
Current TPM State
Display current TPM state.
Change TPM State
This field will change if user select from the drop down list.
Change Option: No Change, Enable, Disable, Activate, Deactivate, Clear, Enable and Activate,
Deactivate and Disable, SetOwnerInstall with state=True, SetOwnerInstall with state=False,
Enable + Activate + SetOwnerInstall_True, Deactivate + Disable + SetOwnerInsstall_False, Clear
+ Enable + Activate
2-17
To Next Page
Loading...
