EasyManua.ls Logo

Comtech EF Data CDM-570L - Page 328

Comtech EF Data CDM-570L
452 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Maximum bandwidth in kbps <0 -
99999, enter = 99999
0 -
99999
Enter desired Maximum Bandwidth in kbps.
If no Maximum is desired, select enter, Bandwidth will be
displayed as ‘99999’
Source IP address <enter = 0.0.0.0>: x.x.x.x Enter desired Source IP Address or subnet.
If no Source IP is desired, select enter, Source IP will be
displayed as ‘***’
Number of source subnet bits <0,8-
32, enter = 0>:
0,8-32 Enter desired Source subnet bits.
If no Source subnet is desired, select enter, Source subnet will be
displayed as ‘/*’
Destination IP address <enter =
0.0.0.0>:
x.x.x.x Enter desired Destination IP Address or subnet.
If no Destination IP is desired, select enter, Destination IP will be
displayed as ‘***’
Number of Destination subnet bits
<0,8-32, enter = 0>:
0,8-32 Enter desired Destination subnet bits.
If no Destination subnet is desired, select enter, Destination
subnet will be displayed as ‘/*’
Specify TCP/UDP source port [MIN]
(1 - 65535)<Enter: ***>
1 -
65535
Enter desired TCP/UDP source port (or Min port of a range).
If no TCP/UDP source port is desired, select enter, Source port
will be displayed as ‘***’
Specify TCP/UDP source port [MAX]
(1 - 65535)<Enter: ***>
1 -
65535
Enter desired TCP/UDP source port (or Max port of a range).
Will not display if no MIN TCP/UDP source port was selected.
17–28

Table of Contents

Related product manuals