Comtech EF Data CDM-570L - Page 349

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
Rx Code Rate
R
1 – 5/16
2 – 21/44
3 – 1/2
4 – 2/3
5 – 3/4
6 – 7/8
7 – 0.95
9 – 1/1
Rx Demodulation
M
Sets receive demodulation type
1 -- BPSK
2 -- QPSK
3 -- OQPSK
4 – 8-PSK
5 -- 16-QAM
6 -- 8-QAM
Rx Spectrum Inversion
U
1 - Normal
2 - Inverted
Rx Data Inversion
I
1 - Normal
2 – Inverted
Rx Descrambling
B
1 - Off
2 – On-Default
3 – On-IESS-315
Rx Acquisition Range
(Sweep Width)
W
Valid ranges are from 0 to 200 kHz
(1 to 32HKz if symbol rate < 625Ksymbol)
Eb/No Alarm Point
P
Valid ranges are from 0.1 to 16.0
Rx Buffer Size
F
1 -- Disabled
2 -- +/-_1024_bits
3 -- +/-_2048_bits
4 -- +/-_4096_bits
5 -- +/-_8192_bits
6 -- +/-_16384_bits
7 -- +/-_32768_bits
Save Parameters
S
This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit
X
This option allows a user to exit the current menu and
return to its parent menu.
17–49