Contec CMS8000 Manual

-
-
-
- 36 -
-
-
-
4.6
4.6
4.6
4.6 When
When
When
When an
an
an
an Alarm
Alarm
Alarm
Alarm Occurs
Occurs
Occurs
Occurs
N
N
N
N ote
ote
ote
ote
Wh
Wh
Wh
Wh en
en
en
en an
an
an
an alarm
alarm
alarm
alarm occurs,
occurs,
occurs,
occurs, you
you
you
you should
should
should
should always
always
always
always check
check
check
check the
the
the
the patient's
patient's
patient's
patient's condition
condition
condition
condition first.
first.
first.
first.
The alarm message appears at the top of the screen on the right side. It is needed to identify the alarm
and act appropriately, according to the cause of the alarm.
1. Check the patient's condition.
2. Identify the cause of the alarm.
3. Silence the alarm, if necessary.
4. When cause of alarm has been over , check that the alarm is work ing proper ly.
You will find the alarm messages for the individual parameter in the ir appropriate parameter chapters of
this manual .

Contec CMS8000 Specifications

General

Category	Medical Equipment
Device Name	Contec CMS8000
Type	Patient Monitor
ECG Lead Mode	3-lead or 5-lead
Resolution	800 x 600
Power Supply	AC 100-240V, 50/60Hz
Battery	Rechargeable lithium battery
Operating Temperature	5°C to 40°C
Storage Temperature	-20°C to 55°C
Display	TFT LCD
Screen Size	12.1 inches
Parameters	ECG, RESP, NIBP, SpO2, TEMP, PR
Interface	Ethernet, Nurse call
Humidity	15% to 95% non-condensing
Battery Life	Approximately 4 hours