-
-
-
- 6 -
-
-
-
can also be selected according to the actual requirement. In the IBP waveform area, the waveform
scale is displayed. The three dotted lines for each IBP waveform form up to down represent
respectively the upper limit scale, reference scale and lower limit scale. The values of these three
scales can be set. The specific method is given in the part: Measure
IBP.
When menu is wanted during screen operation, the menu always occupies the fixed position in the
middle part of the waveform area, therefore part of waveform can not be viewed temporarily. After
exiting the menu, the system will restore the original screen.
The user may set up the rate to refresh the waveform. The method to adjust the refreshing rate of each
waveform is discussed in the setup description of each parameter.
Parameter
Parameter
Parameter
Parameter Area
Area
Area
Area
The parameter area lies to the right side of the waveform area, whose position basically corresponds to
the waveform. The parameters displayed in the parameter area include:
ECG
— heart rate or pulse rate (unit: beats/minute)
— The ST analyzing result of channel 1 and 2: ST1, ST2 (unit: mV)
— PVCs ( unit: times/minute )
NIBP
— From left to right, there are Systolic pressure, Mean pressure and Diastolic
pressure ( unit: mmHg or kPa )
SpO
2
— SpO
2
( unit: % )
— Pulse Rate ( unit: beats/minute )( When “ BOTH ” item is selected )
IBP
－ The blood pressure of channel 1 and 2. From left to right, there are Systolic pressure,
Mean pressure and Diastolic Pressure(unit:mmHg or kPa)
CO
2
－ EtCO
2
(unit:mmHg or kPa)
－ INS CO
2
(unit: mmHg or kPa)
－ AwRR(times/minute)
RESP
— Respiration Rate ( unit: times/minute )
TEMP
— Temperature of channel 1 and 2: T1, T2 and the difference between them TD. (unit:
℃ or ℉ )
Alarm
Alarm
Alarm
Alarm lamp
lamp
lamp
lamp and
and
and
and alarm
alarm
alarm
alarm status:
status:
status:
status:
In normal status: the alarm lamp is not on.
When alarm exists, the alarm lamp flashes or lights on. The color of the lamp corresponds to the alarm
level. R efer to related c hapter : Alarm .
For the d etails of alarm information and prompt information, refer to the related content of each
parameter in related c hapter.
Warning
Warning
Warning
Warning
Always
Always
Always
Always verify
verify
verify
verify the
the
the
the self-check
self-check
self-check
self-check function
function
function
function of
of
of
of audible
audible
audible
audible and
and
and
and visual
visual
visual
visual (LED)
(LED)
(LED)
(LED) alarms
alarms
alarms
alarms when
when
when
when powers
powers
powers
powers on.
on.
on.
on.
To Next Page
Loading...
Need help?
General
