95
Setting Up Parameters
Destinations
Home.#.Initiate
The Home.#.Initiate destination is used to initiate the home function. The Home is initiated
on the rising edge of this function. The device will not initiate a Home if there is an Index,
Jog, or Program in progress, or if the Stop destination is active or if a travel limit is active.
Home.#.SensorTrigger
This destination is required to be used if you are homing to a sensor. This destination is edge
sensitive. The home position is determined when the Home Sensor destination is activated.
If the device receives a Home.#.Initiate input while the Home.#.SensorTrigger is active, you
can choose to have the motor “back-off” of the home sensor before it initiates the home
function, or move forward to the next sensor.
If debounce is used on the hardware input that the Home.#.SensorTrigger is assigned to, the
debounce determines the length of time the input must be active to be considered a valid input.
The rising edge of the sensor is still used for the reference position. This maintains accuracy
while providing the ability to ignore false inputs.
To Next Page
Loading...
Need help?
General