Select the check box and click Setting to select the channel and PTZ action.
When an alarm occurs, the NVR device associates the channel to perform the
corresponding PTZ action. For example, activate the PTZ in channel one to turn
to the preset point X.
⚫ Tripwire alarm supports to activate PTZ preset point only.
⚫ You need to set the corresponding PTZ actions first, see "1.4.3 Configuring
PTZ Functions."
At the end of the alarm, the recording extends for a period of time. The time
range is from 10 seconds to 300 seconds.
Select the check box and select the channel for tour. When an alarm occurs, the
local interface of the NVR device displays the selected channel screen.
⚫ You need to set the time interval and mode for tour first, see "4.16.2 Tour."
⚫ After the tour is over, the preview interface is restored to the screen split
mode before the tour.
Select the check box, the NVR device records the alarm information in the log
when an alarm occurs.
Check the box and then select the corresponding audio file from the dropdown
list. System plays the audio file when the alarm occurs.
Refer to "1.17.1 File Manage" to add audio file first.
Select the check box to activate the buzzer when an alarm occurs.
Step 5 Click Apply.
1.7.3 Database
⚫ After you successfully set the face library, the detected human face can compare with the image on the
face library. The face library settings include create face library, add human face and human face
modeling.
1.8 Event Manager
1.8.1 Alarm Info
⚫ You can search, view and back up the alarm information. Step 1 Select Main Menu > ALARM > ALARM
INFO.
⚫ The ALARM INFO interface is displayed. See Figure 1-163.
To Next Page
Loading...
