⚫ Figure 1-163
Step 4 In the Type list, select the event type; In the Start Time box and End Time box, enter
the specific time.
Step 5 Click Search.
⚫ The search results are displayed.
⚫ Step 6 Click Backup to back up the search results into the external storage device.
⚫ Select an alarm event log and then click Backup to back up it to peripheral USB device.
⚫ Select an alarm event log, click to play the recorded video of alarm event.
⚫ Double-click a log or click Details to view the detailed information of the event.
1.8.2 Alarm Status
⚫ You can view NVR alarm event, and remote channel alarm event.
Select Main Menu > ALARM > ALARM STATUS, the ALARM STATUS interface is
displayed. See Figure 1-164.
⚫
⚫
⚫
⚫
⚫
⚫
⚫
To Next Page
Loading...
