⚫ Figure 1-171
⚫ Step 2 To configure the settings for the tampering detection parameters, see "1.8.5.1 Motion Detect. "
⚫ The Tampering function does not have region and sensitivity items. Step 3 Click Apply to complete the
settings.
⚫ Click Default to restore the default setting.
⚫ Click Copy, in the Copy dialog box, select the additional channel(s) that you want to copy the motion detection
settings to, and then click Apply.
1.8.5.3 Video Loss
⚫ When the video loss occurs, the system activates the alarm.
Step 1 Select Main Menu > ALARM > VIDIEO DETECTION > Video Loss.
⚫ The Video Loss interface is displayed. See Figure 1-172.
To Next Page
Loading...
