Open the USB MANAGER interface. For details about USB
operations, see " 1.3.2.2 USB Manager."
1.3.2.1 Channel Info
⚫ After the remote device registered to the corresponding channel, you can view its status such as alarm
status, record status, connection status, record mode, etc.
⚫ Alarm status: It includes motion detection alarm, video loss alarm, tampering alarm.
⚫ Record status: System is recording or not.
⚫ Bit Rate: System displays bit rate information.
⚫ Status: current channel connection status.
⚫ Click button , system goes to the channel information setup interface. You can view information of
the corresponding channel. See Figure 1-63.
To Next Page
Loading...
