Creality ENDER-3 V2 User Manual

20
2. The Print Menu
This menu displays a list of printable files in the root directory of the SD card, if the filename is too long only
the first characters will be displayed. If there is no SD card inserted or no files are found the list will be empty.
Once a file is selected, a print is started and the print details are shown.
There are 3 options selectable from the printing display Tune, Pause and Stop
Model
Set nozzletemperature
Current nozzletemperature
Set hot bedtemperature
Current hot bed temperature
Tuning override
Print progress
Z-axis height
Tune
Tune allows you to manually modify
the current print speed, nozzle and
bed temperature and the fan speed.
There is also a Z offset control
allowing the position of the Z axis to
be modified.
Pause
Pauses the print allowing it to be
resumed.
Stop
After confirmation the print is stopped
and cannot be resumed.

Creality ENDER-3 V2 Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Bed Leveling	Manual
Extruder Type	Bowden
Power Supply	MeanWell 350W
Build Surface	Carborundum Glass
Printing Technology	FDM (Fused Deposition Modeling)
Max. Nozzle Temperature	255°C
Max. Bed Temperature	100°C
Machine Dimensions	475 x 470 x 620 mm
Machine Weight	7.8 kg
Connectivity	USB, SD Card
Supported Materials	PLA, ABS, TPU, PETG
Display Screen	4.3-inch Color LCD
Print Speed	180 mm/s