Creality ENDER-3 V2 User Manual

22
32
Regular Maintenance:
Clean and Lubricate the Z Axis lead screw.
Dust and stray wisps of filament can adhere to the lead screw, wipe it off with a cloth and apply a small amount of lubricant to keep
everything running smoothly. A dry lubricant, PTFE based is recommended.
Nozzle Wear
The hole in the Nozzle will slowly wear away by the passage of the molten filament through it. The wear rate can be greatly
increased by the use of some filaments containing fibres or particles such as wood, metals etc. Note that nozzle wear is normal
wear and tear and is not covered by the product warranty!
Bowden tube degradation
With repeated heating and cooling the Bowden tube can degrade inside the hot end over time and may need replacing occasionally.
This degradation is increased by continuous use of high melting temperature filaments. Note that this is normal wear and tear and is
not covered by the product warranty!

Creality ENDER-3 V2 Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Bed Leveling	Manual
Extruder Type	Bowden
Power Supply	MeanWell 350W
Build Surface	Carborundum Glass
Printing Technology	FDM (Fused Deposition Modeling)
Max. Nozzle Temperature	255°C
Max. Bed Temperature	100°C
Machine Dimensions	475 x 470 x 620 mm
Machine Weight	7.8 kg
Connectivity	USB, SD Card
Supported Materials	PLA, ABS, TPU, PETG
Display Screen	4.3-inch Color LCD
Print Speed	180 mm/s