12 • DM-NVX-36x(C) Encoders/Decoders Product Manual – DOC. 8879C
Settings Tab – Stream, Mode Configuration
When a different mode is selected, a prompt appears asking for confirmation that the
device be rebooted. Click the
Yes, Reboot Now button to reboot the device.
Device Reboot Prompt
For additional information, refer to the online help of the web interface.
Using SIMPL Windows
Using the top-level programming slot for the DM-NVX-36x(C) device, set the
<DeviceMode> analog input join to the desired mode (Receiver or Transmitter).
The default setting is
Receiver.
Changing modes requires that the device be rebooted. Trigger the <Reboot> digital
input join to reboot the device. For additional information, refer to the SIMPL Windows
help file.
To Next Page
Loading...
