Product Manual – DOC. 8879C DM-NVX-36x(C) Encoders/Decoders • 49
Using SIMPL Windows
Configure a video wall in Slot-06: HDMI OUT:
1. Set the <VideoWallMode>, <Horizontal_Bezel_Compensation>, and
<Vertical_Bezel_Compensation> analog input joins to the desired values.
2. Repeat step 1 for each DM-NVX-36x(C) receiver that connects to a display for
inclusion in the video wall.
For additional information, refer to the SIMPL Windows help file.
Adjustable Underscan
NOTE: Adjustable underscan applies to a DM-NVX-36x(C) device that functions as
a receiver.
If content does not fit properly on a display, adjustments to underscan may be desired.
Adjusting underscan reduces the image size by the specified percentage so that the
entire video frame is displayed.
To adjust underscan, use the web interface or SIMPL Windows as discussed in the
following sections.
Using the Web Interface
To configure underscan:
1. Click the Settings tab and then click Outputs.
2. In the Outputs table, click the Edit button.
3. In the HDMI Output Setting section, configure underscan in the Underscan
drop-down list. Select the desired percentage or select
Custom. If Custom is
selected, enter the desired percentage in the
Set Custom Underscan text box.
For additional information, refer to the online help of the web interface..
To Next Page
Loading...
Need help?
General
