14 • DM-NVX-36x(C) Encoders/Decoders Product Manual – DOC. 8879C
Crestron XiO Cloud Service Connection
The Crestron XiO Cloud® service enables supported Crestron devices across an
enterprise to be managed and configured from one central and secure location in the
cloud. Connection to the Crestron XiO Cloud service can be enabled or disabled using the
web interface.
To configure the connection to the Crestron XiO Cloud service:
1. Click the Settings tab and then click System Setup.
2. In the Cloud Settings section, set the Cloud Configuration Service Connection
toggle switch in the On (right) or Off (left) position. The default setting is in the
On position.
Settings Tab – System Setup, Cloud Settings
For instructions about how to connect to the service, refer to the DM-NVX-363 and DM-
NVX-360 Quick Start (Doc. 8634) or DM-NVX-363C and DM-NVX-360C Quick Start
(Doc. 8636) as appropriate. For information about using the service, refer to the
XiO Cloud Provisioning and Management Service User Guide (Doc. 8214).
To Next Page
Loading...
