16 • TSS-7/TSS-10 Supplemental Guide — Doc. 8327D
Status
Click the Status tab on the top left of the configuration interface to display selections for
viewing the status of device, network, and control system settings.
Click on a selection name to expand the selection. If the selection is expanded, click the
selection name again to collapse the section.
Status Tab Selections
Each selection is described in the sections that follow.
Device
Click Device to view general device information.
Status Tab - Device
The following Device information is displayed:
l Model: The touch screen model name
l Firmware Version: The firmware version loaded onto the touch screen
l Serial Number: The touch screen serial number
Click + More details at the bottom of the Device tab to display an expanded section that
shows additional touch screen information. If + More Details is selected, click - Less details
to collapse the section.