34 • TSS-7/TSS-10 Supplemental Guide — Doc. 8327D
802.1x Configuration
Click 802.1x Configuration to configure IEEE 802.1x network authentication for touch
screen security.
Settings Tab - 802.1x Configuration
l IEEE 802.1x Authentication: Toggle the switch to enable or disable using 802.1x
authentication for the touch screen.
l Authentication Method: Select an 802.1x authentication method (EAP-TLS
Certificate or EAP MSCHAP V2- password) from the drop-down menu.
l Domain: If EAP MSCHAP V2- password is selected for Authentication Method, enter
a domain name that is required for authentication.
l Username: If EAP MSCHAP V2- password is selected for Authentication Method,
enter a username that is required for authentication.
l Password: If EAP MSCHAP V2- password is selected for Authentication Method,
enter a password that is required for authentication.