Crestron TSS-7 - NFS Rendezvous Application Setup

Supplemental Guide — Doc. 8327D TSS-7/TSS-10 • 57
NFSRendezvous
To set up the NFS™ Rendezvous scheduling application on the touch screen:
NOTE: A NFS Rendezvous account is required to use this application. For more
information, visit https://myrendezvous.net.
1. Access the touch screen web configuration interface. For more information, refer to
Web Configuration (on page12).
2. Navigate to Settings > Applications.
3. Select NFSRendezvous from the Application Mode drop-down menu.
Settings Tab - Applications(NFS Rendezvous)
4. Reboot the touch screen. The Rendezvous user interface is displayed on the touch
screen following the reboot.
Rendezvous User Interface
5. Use the onscreen keyboard to enter the URL for the account scheduling API, and
then tap CHECK.
6. Once the application is verified to work with the scheduling API, tap SAVE.
7. In the Alert dialog appears, tap Yes to change the API URL, and then tap OK to close
the alert.