CSC TT250 - Page 83

TT250Owner’s andServiceManual
www.CSCMotorcycles.com
82

Thefloatpivotsonthefloatpivotshafttooperatethefloat
valve.Thefloatvalveisconnectedtothefloatbyawireclip.
Gentlypushthefloatpivotshaftoutofthecarburetorbody.
Liftthefloatandthefloatvalvefromthecarburetor
body.Takecarenotto
dropthefloatvalve;itwillfalloffof
thefloatwhenthefloatistilted.
Thesearrowsidentifythefloatvalveandthepivot.
Thisisthefloatvalve.