Switch(config)# snmp-server trap-type all
All types of SNMP traps will be sent.
Switch(config)# switch sfp polling
Enable the Switch to refresh SFP DMI
information and current state in a fixed interval.
Switch(config)# switch statistics polling
Enable the Switch to refresh counter
information and current state in a fixed interval.
Switch(config)# no switch sfp polling
Disable the Switch to refresh SFP DMI
information and current state in a fixed interval.
Switch(config)# no switch statistics polling
Disable the Switch to refresh counter
information and current state in a fixed interval.
2.5.15 Switch-info Command
Set up the Managed Switch‟s basic information including company name, hostname, system
name, etc..
Switch(config)# switch-info
company-name
[company_name]
Enter a company name for this Switch, up
to 55 alphanumeric characters.
Switch(config)# switch-info
dhcp-vendor-id
[dhcp_vendor_id]
Enter the user-defined DHCP vendor ID up
to 55 alphanumeric characters. Please
make sure you have an exact DHCP
Vendor ID with the value specified in
“vendor-classes” in your dhcp.conf file. For
detailed information, see Appendix A.
Switch(config)# switch-info
system-contact
[system_contact]
Enter contact information up to 55
alphanumeric characters for this Managed
switch.
Switch(config)# switch-info
system-location
[system_location]
Enter a brief description of the Managed
Switch location up to 55 alphanumeric
characters. Like the name, the location is
for reference only, for example, “13
th
Floor”.
Switch(config)# switch-info
system-name
[system_name]
Enter a unique name up to 55 alphanumeric
characters for this Managed Switch. Use a
descriptive name to identify the Managed
Switch in relation to your network, for
example, “Backbone 1”. This name is
mainly used for reference only.
To Next Page
Loading...
Need help?
General
