CTS HES-3109 Series - 1.3 LED Definitions; 1.4 Button Definitions

10
1.3 LED Definitions
LED
Definition
Color
Operation
Power
Off
Device is powered off.
Green
Device is powered on.
System Status
Orange
System is booting up.
Green
System is working normally.
Orange
Blinking
When the system is set back to default
factory setting, the Status LED indicator
will blink in orange for 3 times.
When the system is restarted, the Status
LED indicator will blink in orange once.
Battery
Charging
(For BAT
models only)
Green
When the battery is connected to the
device, steady green indicates that it is
fully charged.
Green Blinking
When the battery is connected to the
device, green blinking indicates that it is
charging.
Battery
Discharging
(For BAT
models only)
Orange
The battery is installed or connected
incorrectly.
Orange
Blinking
When battery is installed to the device,
orange blinking indicates that the battery is
in use.
Port Link Status
Off
Port link is down
Green
Link is up and works under 10/100Mbps.
Orange
Link is up and works under 1000Mbps.
Green/Orange
Blinking
The port is receiving and transmitting data.
1.4 Button Definitions
Button
Operation
Smart Lighting Control
Button
System Status LED and Port Link LEDs will be turned off by
pressing the button. Only Power and Battery Discharging
LED indicators stay on.
Reset Button
Insert a pin or paper clip to press the Reset button for 5
seconds to restart the device.
Insert a pin or paper clip to press the Reset button for 10
seconds to reset the device to factory defaults.