78
3.6 System Utility
Select the folder System Utility from the left column and then the following screen page
appears.
1. Event Log: Event log can keep a record of system‟s log events such as system warm
start, cold start, link up/down, user login/logout, etc. They will be kept only when your CPU
version is A06 with Boot ROM version A08 or later version. If your CPU or Boot ROM
version is older than the one mentioned above, all events will lose when the system is
shut down or rebooted.
2. Update: This allows users to update the latest firmware.
3. Load Factory Settings: Load Factory Setting will set the configuration of the Managed
Switch back to the factory default settings. The IP and Gateway addresses will be set to
the factory default as well.
4. Load Factory Settings Except Network Configuration: Selecting this function will also
restore the configuration of the Managed Switch to its original factory default settings.
However, this will not reset the IP and Gateway addresses to the factory default.
To Next Page
Loading...
Need help?
General
