80
Server Address: Enter the specific IP address of the File Server.
User Name: Enter the specific username to access the File Server.
Password: Enter the specific password to access the File Server.
File Location: Enter the specific path and filename within the File Server.
Put: Click Put to start the upload process and transmit files to the server.
Update: Click Update to instruct the Managed Switch to update existing firmware or
configuration to the latest one received. After a successful update, a message will pop up.
The Managed Switch will need a reset to make changes effective.
Transmitting State: This field displays the uploading or updating progress.
3.6.3 Load Factory Settings
Load Factory Settings will set all configurations of the Managed Switch back to the factory
default settings, including the IP and Gateway address. This function is useful when network
administrators would like to re-configure the system. A system reset is required to make all
changes effective after Load Factory Setting.
Select Load Factory Settings from the System Utility menu and then the following screen
page appears.
Click the “OK” button to restore the Managed Switch back to the defaults.
To Next Page
Loading...
Need help?
General
