Cub Cadet Yanmar SC2400 User Manual

14-34
14. PERIODIC SERVICE
Sc2400 Operator’s Manual
2. Flushing the Cooling System
1. Fill the cooling system with water and common
flushing / cooling liquid. Follow the flushing /
cooling liquid manufacture's instructions.
2. Reinstall and retighten the radiator cap.
3. Start and run the engine until it reaches the
operating temperature.
Avoid injury:
●The engine and coolant can be hot. Avoid
contact with skin to prevent severe burns.
ALWAYS wear safety glasses when draining
the cooling system.
4. Stop the engine.
5. Immediately drain the cooling system before rust
and dirt in it settle. Refer to “Draining the Cooling
System”.
6. Plug the drain hose and fix it with the clamp.
(A) Drain hose
WARNING
(A)
P3014932

Cub Cadet Yanmar SC2400 Specifications

General

Engine Power	24 hp
Transmission Type	Hydrostatic
Fuel Capacity	6.6 gallons
Drive	4WD
PTO	Independent
Hydraulic System	Open center
3-Point Hitch	Category 1
Engine Type	3TNV76 diesel engine