Cub Cadet Yanmar SC2400 User Manual

8-6
8. OPERATING THE TRACTOR
Sc2400 Operator’s Manual
7. Disengage the parking brake.
1. Fully depress the brake pedal.
2. Fully push the parking brake lever forward to
unlock the parking brake.
3. Remove foot from the brake pedal. Make sure
that the brake pedal is unlocked.
(A) Brake pedal
(B) Parking brake lever
8. Remove foot from the brake pedal.
9. Slowly depress the forward side of
the forward and reverse drive pedal or
reverse side of the forward and
reverse drive pedal.
■ Forward and Reverse Drive Pedal
The tractor accelerated speed depends on how far
the drive pedal is pressed.
(A) To move forward:
depress the forward side of the forward and
reverse drive pedal.
(B) To move backward:
depress the reverse side of the forward and
reverse drive pedal.
(A) Forward side of the forward and reverse drive
pedal
(B) Reverse side of the forward and reverse drive
pedal
IMPORTANT:
●When the drive pedal is released, the transmission
will automatically return to the NEUTRAL position.
10.Operate the steering wheel and travel
to the intended destination.
11.Use the cruise control as necessary.
The cruise control is a feature that regulates forward
tractor travel to a specific speed.
3014916f
(A)
(B)
3014916c
(A)
(B)

Cub Cadet Yanmar SC2400 Specifications

General

Engine Power	24 hp
Transmission Type	Hydrostatic
Fuel Capacity	6.6 gallons
Drive	4WD
PTO	Independent
Hydraulic System	Open center
3-Point Hitch	Category 1
Engine Type	3TNV76 diesel engine