Cub Cadet Yanmar SC2400 User Manual

7-3
7. OPERATING THE ENGINE
Sc2400 Operator’s Manual
3. Remove foot from the forward and
reverse drive pedal and set the pedal
to the NEUTRAL position.
NOTE:
●With the parking brake engaged, the forward and
reverse drive pedal is locked in the NEUTRAL
position.
4. Engage the parking brake securely.
■ Engaging the Parking Brake
1. Fully depress the brake pedal.
2. Fully pull the parking brake lever backward to
engage the parking brake securely.
3. Remove foot and make sure that the brake is fully
locked.
Note:
●Applying the parking brake engages the differential
lock at the same time.
(A) Brake pedal
(B) Parking brake lever
IMPORTANT: Avoid damage.
●NEVER step on the forward and reverse drive
pedal while the parking brake is engaged.
5. Set the range shift lever to the Slow
position.
(A) Range shift lever
(a) Slow position
3014916a
(A)
(B)
3014919a
(A)
(a)

Cub Cadet Yanmar SC2400 Specifications

General

Engine Power	24 hp
Transmission Type	Hydrostatic
Fuel Capacity	6.6 gallons
Drive	4WD
PTO	Independent
Hydraulic System	Open center
3-Point Hitch	Category 1
Engine Type	3TNV76 diesel engine