Cub Cadet Yanmar SC2400 User Manual

12-1
12. TIRES, WHEELS AND BALLAST
Sc2400 Operator’s Manual
12. TIRES, WHEELS AND BALLAST
Mounting the tire is dangerous work. Qualified
professional personnel should mount the tire on the
rim using proper equipment.
ALWAYS keep the tires inflated to the correct
pressure. NEVER exceed the recommended inflation
pressure specified in this Operator’s Manual.
When servicing or replacing the tire(s), ALWAYS
keep the tractor securely supported.
ALWAYS keep the wheel bolts tightening torque to
the specified torque.
Avoid injury:
●Mounting the tire is dangerous work. Qualified
professional personnel should mount the tire
on the rim using proper equipment.
IMPORTANT:
●Only use the tires approved by Cub Cadet Yanmar
dealers.
●When intending to use tires whose size is different
from that of the original tires, contact your local
Cub Cadet Yanmar dealer for the information about
front drive gear ratio.
WARNING
1. Tires
WARNING

Cub Cadet Yanmar SC2400 Specifications

General

Engine Power	24 hp
Transmission Type	Hydrostatic
Fuel Capacity	6.6 gallons
Drive	4WD
PTO	Independent
Hydraulic System	Open center
3-Point Hitch	Category 1
Engine Type	3TNV76 diesel engine