8-16
8. OPERATING THE TRACTOR
Sc2400 Operator’s Manual
1. Before approaching a slope, set the range shift
lever to the slow position.
(A) Range shift lever
(a) Slow position
2. Lightly depress the forward side of the forward
and reverse drive pedal to start moving.
IMPORTANT:
●Always slowly drive the tractor on a slope.
3. ALWAYS travel slowly on a slope.
4. Drive the tractor according to the type of a slope,
as instructed below:
■ Uphill / Downhill
Make sure that the range shift lever is in the slow
position. Run the engine at a lower speed.
■ Steep Downhill
To be able to apply the engine brake, turn the range
shift lever to the slow position.
(A) Forward and reverse drive pedal
3014919a
(A)
(a)
3014916b
(A)
To Next Page
Loading...
