EasyManuals Logo

Cub Cadet Yanmar SC2400 User Manual

Cub Cadet Yanmar SC2400
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
1-7
1. SAFETY PRECAUTIONS
Sc2400 Operator’s Manual
1. Disengagement of the 4-wheel drive is
recommended.
2. Remember that the braking characteristics differ
between the two and four wheel drive modes. Be
aware of the current drive mode and use
carefully.
3. Before turning, always slow down the tractor.
High-speed turn may cause the tractor to tip over.
4. When traveling on a road, be sure that the Slow
Moving Vehicle (SMV) emblem is on the tractor
and is clearly visible. Use the hazard lights and
turn lights as required by the currently effective
local laws or regulations.
5. Strictly observe all the currently effective local
traffic and safety laws and regulations.
6. Turn ON the headlights as required by the
currently effective local laws or regulations.
7. Always travel at a speed that allows you to
maintain control of the tractor.
8. Avoid engaging differential lock while traveling on
a road. It may cause the operator to lose control
of the tractor.
9. While traveling on a road, do not suddenly turn
the steering wheel. Such an action can lead to
loss in the stability of the tractor, and can cause
an extremely dangerous situation.
10. While on a road, do not attempt to operate an
implement. During transportation, put the 3-point
hitch control / cutting height adjustment lever in
its raised position and lock it with the position
stop knob. Do not fully close the hydraulic flow
control / stop knob.
1. Disengage the Power Take Off (PTO), lower the
implement to the ground, set the forward and
reverse drive pedal in the neutral positions,
engage the parking brake securely, stop the
engine and remove the key from the starter key
switch.
2. Before leaving your tractor, be sure the tractor is
completely stopped.
3. Do not park on a steep slope. Rather, park on
solid, flat, level ground whenever possible. If
parking on a slope is unavoidable, park the
tractor across the slope, and lower the implement
to the ground and chock the wheels.
4. Allow the tractor to cool at least 5 minutes before
storing.
6. Traveling on a Road
7. Safe Practices for Parking Your Tractor

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet Yanmar SC2400 and is the answer not in the manual?

Cub Cadet Yanmar SC2400 Specifications

General IconGeneral
Engine Power24 hp
Transmission TypeHydrostatic
Fuel Capacity6.6 gallons
Drive4WD
PTOIndependent
Hydraulic SystemOpen center
3-Point HitchCategory 1
Engine Type3TNV76 diesel engine

Related product manuals