6-1
6. PRE-OPERATION CHECK
Sc2400 Operator’s Manual
6. PRE-OPERATION CHECK
●Check the tractor for damage, excessive wear, cracks, missing parts,
exposed wiring and any other problems, including leaks.
●Check the joints and connections for looseness.
●Check that all the lights illuminate.
●Check that all the safety-alert decals are in correct position.
If any problem is detected, contact your local Cub Cadet Yanmar dealer,
and correct the problem. NEVER operate the tractor when a problem has
been indicated.
●ALWAYS be aware of the limitations of the performance of the tractor.
●Operate the tractor, keeping in mind “SAFETY FIRST!”.
●Check the safety features.
●Check the tire pressure.
●Check that the remaining diesel fuel is sufficient for the intended
operation.
●Check the engine oil level.
●Check the transmission oil level.
●Check the coolant level.
●Remove grass clippings and debris from the tractor.
●Clean the air cleaner element.
●Check the tractor for any leaks such as oil, coolant and fuel.
●Check the radiator for possible blockage.
●Check the retractable seat belt and the Roll-Over Protective Structure
(ROPS) for any problem.
If any problem is detected, contact your local Cub Cadet Yanmar dealer
and correct the problem.
●Only wipe off the tractor after washing.
●Chemical agents such as pesticides can damage the plastic surfaces and
painted surfaces. NEVER spray chemical agents near the machine.
●NEVER spill diesel fuel onto the tractor. Diesel fuel can damage the
plastic surfaces and painted surfaces. ALWAYS wipe up spilled diesel
fuel immediately.
1. Pre-Operation Check
2. Precautions before the Operation
3. Routine Check
4. Prevent Damage to the Plastic Surfaces and Painted Surfaces
To Next Page
Loading...
Need help?
General
