Cub Cadet Yanmar SC2400 User Manual

7-4
7. OPERATING THE ENGINE
Sc2400 Operator’s Manual
6. Turn off the Power Take Off (PTO)
switch.
Push in and set the Power Take Off (PTO) switch to
the OFF position.
(A) Power Take Off (PTO) switch
(a) OFF position
(b) ON position
7. Fully push the 3-point hitch control /
cutting height adjustment lever
forward to the lowest position and
lower the mid- or rear-mounted
implements to the ground.
(A) 3-point hitch control / cutting height
adjustment lever
(a) Lowest position
●In order to prevent a turnover accident,
completely lower the implements to the
ground.
8. If the tractor has any implements that
use the implement control lever, lower
them to the ground. Then, set the
implement control lever to the
NEUTRAL position and push in the
implement lock lever to lock.
(A) Implement control lever
(B) Implement lock lever
(a) Lower the implement to the ground
CAUTION
3014919g
(A)
(a) (b)
3014926
3014918b
(A)
(a)
3014903d
(B)
(A)
(a)

Cub Cadet Yanmar SC2400 Specifications

General

Engine Power	24 hp
Transmission Type	Hydrostatic
Fuel Capacity	6.6 gallons
Drive	4WD
PTO	Independent
Hydraulic System	Open center
3-Point Hitch	Category 1
Engine Type	3TNV76 diesel engine