CUMMINS ALLISON JetScan iFX i100 - Page 96

JetScan iFX
®
i100 Scanner All Models
94
Condition
Action
The machine identified a
hardware problem upon
startup.
The MACHINE START WARNING screen will identify errors, including:
• DENSITY SENSOR IS DIRTY OR BLOCKED.
Corrective action should be taken. If the error cannot be resolved,
call a Cummins
Allison representative
.
Press
OK
to return to the main screen and begin processing.
If the machine is turned
OFF
and then turned
ON
, and corrective action has not
been taken, the MACHINE START WARNING screen will appear again.