Curtis Instruments AC F4-A - How to Use this Manual; Getting the most out of Your Curtis Controller

1 — OVERVIEW
Curtis AC F4-A Motor Controller – August 2020 Return to TOC
pg. 2
HOW TO USE THIS MANUAL
is manual describes how to:
• Properly mount and wire the F4-A controller
• Understand the congurable inputs and outputs
• Apply specic features to match an application
• Access and change parameters
• View and use monitor variables
• Preform the initial setup
• Setup the PDO Mapping
• Diagnose and troubleshoot faults
• Select and use the available programming and diagnostic tools
GETTING THE MOST OUT OF YOUR CURTIS CONTROLLER
Thoroughly read and refer to this manual to apply and configure the F4-A controller.
Understanding the installation & wiring guidelines, the parameter settings, the VCL functions,
the initial setup & commissioning, and using the diagnostic and troubleshooting guide are critical
to a successful application.
This manual describes the typical usage of the F4-A controller. If the intended application is
not illustrated or discussed within this manual, contact the Curtis distributor or the regional
Curtis sales-support oce for additional technical support. e Curtis sales and support oce-
contact information is available from the Curtis Instruments website under the International tab.
https://www.curtisinstruments.com/international/
3141 CAN Gauge