Chapter 6: Instructions 123
Example
Program Expression Operation Results
When contact R0.0 and/or R0.1 turns On, the CALL Sb =
3 instruction is executed and the instructions between
SBR Sb = 3 and RET are executed. After executing this
subroutine, the program returns to the next instruction
after the CALL.
CALL
Sb = 3
CALL
Sb = 3
R0.0
R
SBR
Sb = 3
RET
R0.1
R
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
