CYBELEC ModEva Pac - Machine Initialization DNC;ENC

6/40
ModEva Pac User Manual
April
2016
V2.3
Programming of Punches Programming of Dies
Programming of all
dies is done from
this page.
All the dimensions
relative to the tool
are introduced here.
A drawing representing the tool is displayed
on the right of the screen.
See Creating a Tool, page 12.
Programming of all
punches is done
from this page.
All the dimensions
relative to the tool
are introduced here.
A drawing representing the tool is displayed
on the right of the screen.
See Creating a Tool, page 12.
Welcome Machine Initialization DNC/ENC
This page is reserved
for the technical
maintenance of the
numerical control or
the machine.
It allows clearing the
ModEva data and to
modify the physical indexes of the machine.
The level 3 password (see Access by
Password, page 34) is necessary to
intervene on this page.
Main data for the
machine and the
numerical control.
Gray color fields
are multiple choice
fields which can
be modified (see
General navigation, page 5).
Search of Product/Criteria Transfer
Allows making data
transfers from one
memory to another
(USB, network,
etc...).
Allows searching for
different products
stored in the
numerical control
according to certain
criteria.