CYBELEC ModEva Pac - Correction Button; Tools Bend; Corrections

10/40
Corrections
ModEva Pac User Manual
April
2016
V2.3
Correction
Button
The correction button allows you to access the corrections page, where the individual
bends of a part can be fine-tuned. When touching the correction button, the following
pop-up window is displayed.
Corrections
Allows applying the
corrections to the
different machine
axes as a function of
the results obtained
during bending.
See Bending, Tests
and Corrections, page 27.
Tools Bend
Allows modifying
the position and the
width of the tools
mounted on the
machine. Certain
safety factors can
also be modified
here.