38/40
ModEva Pac User Manual
April
2016
V2.3
backinG the SySteM uP
For evident safety reasons, we highly recommend that you make a backup of your
machine, at least once after the machine is properly installed and running on your
premises.
If your machine wasn’t delivered with a backup memory key, the following pop-up window
should appear once a week:
MakinG a backup of The SySTeM
This pop-up windows will keep on appearing on a weekly basis until the backup
has been made.
Setting inStructionS:
1. In the pop-up window here above, touch to launch Cybelec Backup Utility.
2. Insert a USB key (8 GB or bigger) into the numerical control.
Use preferably a new and empty USB key, as the Cybelec Backup Utility will
format it and erase all its content.
3. For easy identification, enter the serial number of the numerical control after BK_ as
the new volume’s label.
4. Click on
to start creating the bootable USB key. At the end of the process,
the following window is displayed:
Enter the serial number of
the NC here
To Next Page
Loading...